Performance of RAM

Slam is the main memory of a device where data and projects are stored. The abbreviation RAM means “Irregular access memory” converted to Spanish into “Arbitrary access memory”.

RAM is known as unpredictable memory, which means that information is not saved all the time, that is why, when there is never again a source of vitality in the device, data is lost. In addition, RAM can be reworked and read continuously.

RAM modules, known as RAM, are necessary for equipment that contains coordinated circuits that are added to the printed circuit, these modules are inserted into the motherboard of a PC. Memories of RAM are a piece of PC, computer game consoles, cell phones, tablets, among other electronic devices.

There are 2 essential types of RAM; Dynamic RAM (DRAM) and static RAM (SRAM), both use distinctive advances to store information. Dynamic RAM (DRAM) must be revitalized 100 times per second, while static RAM (SRAM) should not be revived most of the time, which makes it faster and more expensive than dynamic RAM.

Unlike RAM, ROM is a non-unpredictable memory because the data it contains cannot be erased when the PC is killed or the power is cut off. For more information you can see our article of ROM memory.

RAM types

DDR known as SDRAM (Synchronous Dram) is a dynamic type of RAM that is practically 20% faster than EDO RAM. This memory intersperses at least two internal memory networks, so that when arriving at a grid, the next one is planning to arrive, said memory allows reading and composing information at several times the speed of the diver.

DDR2 are some updates to DDR memory that allow information / performance media to function at twice the central recurrence, allowing 4 exchanges to be made in each clock cycle. A genuine 200 MHZ DDR memory transmits ostensibly at 400 MHZ, the DDR2 with those 200 MHz equivalents transmits 800 MHZ NOMINALS.

DDR3 can be several times faster than DRR2 memory, hypothetically, DDR3 could exchange information at a successful clock speed of 800-2600 MHZ, in contrast to the DDR2 range of 400-1200MHZ or 200-533MHZ of DDR2.

Reserve memory or RAM reserve A reserve is an uncommon fast stockpiling framework, it very well may be either a saved region of ??the principle memory or a different rapid stockpiling gadget. A store is a piece of fast static RAM (SRAM) as opposed to the moderate and shabby unique RAM (DRAM) utilized as principle memory. The reserve is viable on the grounds that the projects get to similar information and directions again and again.

Inside every one of these recollections can exist distinctive sorts of capacity limit, that is, they can have limit of 1GB, 2GB, 4GB, 8GB.

What is RAM memory for?

The RAM memory serves to improve the speed of reaction in the season of using a program on the PC, since the data that the program needs to work is stored in RAM, in this sense, when the program is run it is exchanged al Process each of the guidelines that must be executed for the transmission of distinctive information to be so important; therefore, the RAM and the processor communicate with each other to exchange the requested information.

The RAM stores this data and sends to the processor the information that must be handled, therefore, as long as the memory has a higher transmission speed and a more significant storage limit, the client will have the ability to use more projects in the meantime and more Quick.

Leave a Reply

Your email address will not be published. Required fields are marked *